The LM-2340W is a 23” calibrated professional monitoring solution for general editing and onset/field applications. The 23” LM-2340W and its slightly smaller (21.5”) sibling the LM-2140W were purpose built as full-featured low cost monitoring solutions for environments that do not require the performance and color fidelity of FSI’s flagship LM-2461W. While not equipped with the advanced Color Fidelity Engine found on the LM-2461W these units are still fully calibrated and will offer sufficient color accuracy for general color judgment in a wide array of professional monitoring applications. Additionally, the LM-2340W features the same advanced video processing hardware found on our top of the line monitors ensuring that practically any broadcast standard signal, even interlaced or PsF formats, will be displayed accurately.
The LM-2340W features a full native HD 1920x1080 resolution IPS LCD panel with a power efficient white LED backlight. Additionally, this unit comes standard with 3Gbps/HD/SD-SDI, Component, Composite, and DVI-I Inputs for support of virtually any video format including NTSC/PAL, 4:4:4 signals, 2K, and 1080p50/60 sources. The LM-2340W is also capable of additional Level B 3Gbps SDI monitoring modes as explained here.
This unit comes with many standard broadcast monitor features like Blue Only, MonoChrome, Markers, Safety Areas, & Tally Lights and like all FSI monitors it also comes standard with advanced features like our 12 Mode Scopes, Focus Assist, Time Code Display, Freeze Frame Picture and Picture, Audio Disembedding, and Audio Level Meter features.
The LM-2340W is not only a good general editing monitoring, but it is also well suited as a field monitor thanks to its durable, yet lightweight, aluminum frame and ultra-efficient LED backlight. At just 10 lbs (12.5 lbs with stand) the LM-2340W is not only lighter than most comparably sized professional broadcast monitors, but even weighs several pounds less than the majority of 17" broadcast monitors on the market. Additionally, the LM-2340W consumes a mere 30 Watts of power making it one of the most efficient full-featured native 1920x1080 resolution broadcast monitors available at any size.
For advanced color grading environments or other very color-critical workflows FSI highly recommends our top of the line LM-2461W reference grade monitor, but for virtually every other general video monitoring application the LM-2340W, and the slightly smaller LM-2140W, are an ideal choice at an unbeatable price. At just $2,995 with a native 1920x1080 resolution panel, standard 3Gbps SDI, and an advanced feature set rivaling units costing 10 times as much the LM-2340W sets a new standard for value in professional video monitoring.
Features
Native 1920x1080 Resolution HD LCD Panel
10 Bit Video Processing, 8 Bit LCD Panel (16.7 Million Colors)
Ultra-Low Power Consumption: 30W@120nit, 40W@250nit
Lightweight: 10 lbs (4.5 kg) without Stand, 12.5 lbs (5.7 kg) with Stand
Standard 3Gbps SDI Inputs Included for Support of Advanced SMPTE 425M-AB Signals
3D Signal Analysis Modes for multiplexed Level B 3Gbps SDI signals: Left Eye, Right Eye, Picture and Picture, Horizontal Split (with adjustable split position), Vertical Split (with adjustable split position), 3D Disparity, 3D Line By Line, 3D Checkerboard with adjustable Checkerboard size. *The LM-2340W is not a 3D display, these modes are strictly diagnostic modes for 3D signal analysis.
The following Scope Modes are available on all inputs (any 2 may be viewed simultaneously):
*Audio Phase Meter only on HD/SD-SDI sources.
Audio Level Meter Feature:
Allows up to 16 channels of audio to be monitored on screen. These will be displayed at the top of the screen or can be viewed at the bottom of the screen simultaneously with another Scope Window.
